Kebutuhan Energi untuk Memproses Kristal Silikon dan Waktu Pengembalian DAN KONDISINYA DI INDONESIA
| Idteknologi | 532 |
|---|---|
| Judul | Kebutuhan Energi untuk Memproses Kristal Silikon dan Waktu Pengembalian DAN KONDISINYA DI INDONESIA |
| Abstrak | This paper is to review existing knowledge on energy requirements for manufacturing photovoltaic (PV) module and system. Estimate energy (primary energy) requirements for manufacturing PV module for scenario: Low* and High 1. For multi crystalline silicon (mc-Si) a. Low is 4200 MJ/ m2 (mc-Si) or 35 MJ/Wp = 3,395 kwh/Wp b. High is 11600 MJ/ m2 (mc-Si) or 96 MJ/Wp = 9.312 kwh/Wp 2. For a single ?crystalline (sc-S) a. Low is 6000 MJ/ m2 or 47 MJ/Wp = 4,559 kwh/Wp. b. High is 13900 MJ/ m2 or 109 MJ/Wp = 10.573 kwh/Wp Estimate energy production (final yield) for application SHS (50 Wp) multi ?crystalline (mc-S) is 65 kwh/Wp/year (1 Wp produce 1,3 kwh/year. Estimate Energy Pay-back Time ,? take energy to save energy?. for Solar Home System Application for over 20 year system life (under 1900 kwh/ m2/year irradiation) are 3-4 years for low scenario and 8 years for high. |
| Katakunci | A single ?crystalline silicon (sc-S), multi crystalline silicon (mc-Si) manufacturing PV module, |
| Kategori | 7 |
| Mediamasa | Jurnal Teknologi Lingkungan Vol. 9, No. 2, Mei 2008 |
| Alamatlink | http://www.kelair.bppt.go.id/Jtl/2008/vol9-2/ |
| Penulis | Abubakar Lubis |
| Instansi | |
| air@webmail.bppt.go.id | |
| Url | |
| Keterangan |
